2 of 2
2
Showcase - DSI LCD 32” with many pictures and videos
Posted: 10 December 2012 10:44 PM   [ Ignore ]   [ # 16 ]
Avatar
Rank
Joined  2012-10-13
Total Posts:  37
New Member

Ok I now remembered that for the tuio to touch events I have used EcoTUIODriver as it runs as a service and it works perfectly. You can find it here..
https://github.com/ecologylab/EcoTUIODriver
Does the same job as touchinjector but it runs as a service…

 Signature 

Proud FTIR Table owner..:D

Profile
 
 
Posted: 15 December 2012 06:00 AM   [ Ignore ]   [ # 17 ]
Rank
Joined  2012-10-30
Total Posts:  23
New Member

Thanks for the tip!
EcoTuioDriver is working very good and as a service.

I’m currently thinking about switching the acrylic with endlighten acrylic
and switch the projector with a lcd screen.

That would be possible right?

I’m very dissapointed in the image quality of the projector. Maybe due to
my not so good Acer X110. But i think a projector will never give a good
image, like a lcd screen.

 Signature 

DSI LCD 32” with many pictures and videos:

http://nuigroup.com/S=e0ec20a79ebf6558e095464ab47332248597bb01/forums/viewthread/14648/

Profile
 
 
Posted: 12 January 2013 07:05 AM   [ Ignore ]   [ # 18 ]
Rank
Joined  2012-10-30
Total Posts:  23
New Member

Opening Post was updated, and albume with many pictures and videos were added.

Also i have a question.
The cables from the boards to the backlight are very short.

5Mbi5Gi6Js#f:2013-01-12%2012.19.21.jpg

Would it be possible to cut them through, and solder a longer cable in between?

 Signature 

DSI LCD 32” with many pictures and videos:

http://nuigroup.com/S=e0ec20a79ebf6558e095464ab47332248597bb01/forums/viewthread/14648/

Profile
 
 
   
2 of 2
2