I have decided to order a 80x120 Sheet 8mm thick Of Endlighten Material Due to the fact i can’t buy/find from ANYONE. so here we go

I will make sure these pieces get packaged correctly!! so no one gets any chipped ends/edges.
The lead time on this order is about 2 weeks before they get the sheet + processing/cutting time.
The piece you get will have (4) finished edges.
PayPal for Payment.  PM or Post here to get on the list

From an 80x120 Sheet we get:

five 24"x43" pieces @ $250ea + around $10-$20 for ground shipping to you
four 24"x32" pieces @ $175ea + around $10-$20 for ground shipping to you

its possible i will have some smaller 7"x12" pieces

16x9 slots:
1) xdvst8x
2) Frankie
3) driath
4) Kyle
5) Fosco

4x3 Slots:
1) peregrin
2) jgerman
3) icedragon
4) EricD

Any questions?

Order Status (05/08/09): Awaiting Shipment....

Hi xdvst8x,
Been lurking a while waiting for a brave soul to foot the bill. I’d like to get in on the order for one 32 x 24 sheet. I’m in PA. Just let me know how and when to pay. Thanks for setting it up!

Please sign me up for a 4x3.

done & done

xdvst8x - 17 April 2009 01:51 PM

done & done

Thanks!

You mentioned a few days ago that some of the suppliers were confused about what you were trying to get. How did you eventually get across to them what was needed?

Yes 2 of the suppliers one in daytona, and the other in orlando did not have a clue.. as to what i was talking about.

To me, if i ask a question about a product that is sold in the line of products that you work in, you should “know” what im talking about.. so needless to say they are not getting the business..

The company im using is in Tampa, FL. and I can drive the 80 miles to pick it up.. to save all of us some $$ on shipping.

Josh

Yup, Ive found acrylic/plexiglass companies usually carry WAY too many different types and grades of the materials that they sell that they usually have to get back to you about certain uncommonly ordered items.  Awesome job setting this up for people xdvst8x.

oh they did make me wait a day for wrong information… i agree.. if they dont know.. of course they have to look it up and get back with you.. but dont get back with wrong information.. u know..

i got my ps3 cam 2day PeauProductions.. thanks!!! cant wait to try it out tonight..

xdvst8x - 17 April 2009 03:31 PM

oh they did make me wait a day for wrong information… i agree.. if they dont know.. of course they have to look it up and get back with you.. but dont get back with wrong information.. u know..

i got my ps3 cam 2day PeauProductions.. thanks!!! cant wait to try it out tonight..

At least you got a callback The two places I tried never got back to me.

I wish I had seen the pre-modded cameras before I enthusiastically ran out and bought a normal PS3Eye I’m more anxious to get the table built so I can write software for it than anything else. The quicker I can get to that stage the better.

xdvst8x - 17 April 2009 03:31 PM

oh they did make me wait a day for wrong information… i agree.. if they dont know.. of course they have to look it up and get back with you.. but dont get back with wrong information.. u know..

i got my ps3 cam 2day PeauProductions.. thanks!!! cant wait to try it out tonight..

Awesome, let me know if you have any problems.  Im modding one right now and shipping 4 of them out in the next few minutes....busy busy busy

i cant wait to get my table built either ( i’ll have to post some pix later tonight of my progress) its based on Viper’s design or from what i can see anyway lol.

i even went and wasted(i think) 55 bucks on regular plexi hoping it might work so i can get something working....lol so we’ll see how that works tonight with my new ps3 cam.

i am anxious to get this thing built, i do alot of software dev with Flex Builder. i have some neat app ideas to try

PeauProductions: in one of my other posts.. i found those surface mounted ribbon IR LEDS from a distributor in china.. they cost about 1/2 what Environmental Lights charges.. i know you have your website store… u want me to PM u the info?

Count me in for piece of 24x32.

I’ve been lurking and reading all the posts for the past week. The more I read the more I get confuse on what to build. So now I decided on building the FTIR / DSI . I just received a piece of acrylic 24 x 32 and some IR LED today. Waiting on ps3eye from (PEAU).

Martin

xdvst8x - 17 April 2009 04:15 PM

i’ll have to post some pix later tonight of my progress?

Please do. I probably won’t start on mine at all until I have everything here ready to go… I still have to work out the mirror setup for my projector.

hi xdvst8x
sign me up for 24x32

come on guys we need more 16x9 people

just donated $25 to thanks for the PS3 DRIVER!!!!!!!!!!!!!!!!!!

PeauProductions - 17 April 2009 03:40 PM

xdvst8x - 17 April 2009 03:31 PM

oh they did make me wait a day for wrong information… i agree.. if they dont know.. of course they have to look it up and get back with you.. but dont get back with wrong information.. u know..

i got my ps3 cam 2day PeauProductions.. thanks!!! cant wait to try it out tonight..

Awesome, let me know if you have any problems.  Im modding one right now and shipping 4 of them out in the next few minutes....busy busy busy

Heh, just open a magento store and start selling those nice things online and automatically

PeauProductions becareful modding those ps3 cams the bandpass filter you are using is alittle big… im guessing when it was tightened down it cracked my ccd :( im so sad tonight

Sign me up for a 24X43

come on guys only 2 slots left, one 4x3 and one 16x9!!

Sign me up for a 24"x32"

OK, lets close this deal!

Ill take the last 24” x 43” if its still available.

Kyle