Hi everybody,

I had a problem, don’t know exactly why but the configapp.exe wasn’t working with my computer. I already solved the problem but I think will be nice to let you know what happened.

I first downloaded the http://touchlib.googlecode.com/files/touchlib-src-win32-20070814.zip and could not make it work, so I went to touchlib page and downloaded only the bins at http://www.whitenoiseaudio.com/touchlib/touchlibBins.zip. Now it’s working!

See ya!

Hi marilialb thanks for sharing! much appreciated, I can imagine other people may run into this problem as well

so wht abt the calibration ...like how is it done nobody has given the information regarding tht ....

bugs, run configapp, check that your filers are correct and that the rectify window only show something when you press against your screen/table. Then hit enter. when the screen with the green crosses pops up, hit ‘c’ to start the calibration. You will see a red cross over a green cross, touch the green cross which has the red cross over it. It will then move to the next green cross(if the touch was recognized)...rinse and repeat (without the rinse).

once all crosses have been done, your touchlib is calibrated. i hope that made sense..

thx a lot elite well i have been trying a lot with it even it shows the callibration completed but when i try opening the flash demos it doesn’t work at all ......and just wanted to ask… m using fog glass so is tht good enough for it cause i cannot c the light coming properly.....

don’t know about fog glass…

but for the flash you need to run osc.exe, then flosc, then the flash app, all those files are included in the touchlib distribution.