Username Remember?
Password Forgot?
Forum Home  >  Hardware  >  Acrylic & Compliant Surfaces  >  Thread
Search  
  
  Advanced Search
   
 
Fix scratch on endlighten? 
 
lucidmedia
Posted: 28 January 2010 12:30 AM   [ Ignore ]
Rank
Joined  2009-09-28
Total Posts:  87
New Member

I noticed this evening that I have a small scratch on the bottom surface of my endlighten. It is not very deep but, of course, it makes a shadow when hit by the projector.

Any suggestions about removing the scratch without further damaging the endlighten?

thanks in advance!

 Signature 

The Dynamic Media Institute at Massachusetts College of Art and Design // Project Blog

“Ideas are cheap. Work is hard. A substantive discussion cannot begin until you present me a testable prototype.”

Profile
 
 
the_goat
Posted: 28 January 2010 05:38 AM   [ Ignore ]   [ # 1 ]
Avatar
RankRank
Joined  2009-11-09
Total Posts:  138
Jr. Member

just use acrylic polish...shouldnt be a problem if its not too deep:

i thought of that too and i would use this professional polish:
http://cgi.ebay.de/ROTWEISS-Acryl-Plexiglas-Politur-150ml_W0QQitemZ390112708319QQcmdZViewItemQQptZAutopflege_Wartung?hash=item5ad48786df

start with a little amount paste and dry cotton, low pressure and polish in circles from inside to outside...easy!

 Signature 

My DSI Project:

DSI Table -with fidicual & object recognition
Proj.Surface: 7D006 on top… but cant find it =(
2x PS3 Camera
Endlightend XXL (10mm) + 850nm LED Ribbon Frame from enviromentall.

Projector: SANYO DWL100 ~ 950€

PC:
Core i5, 8GB Ram, HD5850

Profile
 
 
Touchscape
Posted: 16 February 2010 07:32 AM   [ Ignore ]   [ # 2 ]
Avatar
Rank
Joined  2009-04-06
Total Posts:  23
New Member

You can use BRASSO or PEEK for small scratches. DO NOT USE WET AND DRY PAPER!

 Signature 

http://www.touchscape.org

Profile
 
 
   
 
 
‹‹ Problem getting good blobs on FTIR-Project      Acrylic Projection pp1 + clear acrylic ››